Barnstead Maxi Mix II M37615 Vortex Mixer [used]

Description

Barnstead Maxi Mix II M37615 Vortex Mixer

Serial Number 1254040808305

Intended Use:
The Type M37600 vortex mixers are general laboratory vortex mixers. They are intended for applications where vortexing of single or multiple tubes is required. Vessels with closure tops up to a maximum of 125 ml can also be vortexed.
The unit consists of 1) a mixing surface disc, 2) a three-position power switch and, 3) an adjustable speed control (See Figure 1).

Principles of Operation:
The mixer incorporates a permanently lubricated motor to drive the mixing platform. A three-position power switch enables the mixer to be operated continuously or by depression of the silicone rubber top. The speed of the mixer is regulated by an adjustable rheostat. Also, suction cup feet are incorporated to prevent unit movement.

Speed Control:
The speed control is a nonlinear type control. The oscillating speed will increase at a non-uniform rate as the control is turned clockwise.
To operate Maxi-Mix, move power switch to either the
“FULL” position or the “TOUCH” position. Turn speed control to the desired setting. Touching the vessel to the disc will initiate the vortex action. Mixing action will intensify as greater pressure is exerted against the mixing surface. To stop the mixing action, remove vessel from disc or move the power switch to the “OFF” position. (See Maintenance and Servicing for installation of the single cup mixing head and the mixing surface disc).

Weight: 6 lbs

Dimensions: 6″x7″

Power: 120VAC, .45 A, 50/60 HzDisclaimer: Laboratory Instrument Specialists, Inc. is a proudly independent reseller and service provider of pre-owned laboratory equipment. We are not affiliated with, authorized, sponsored, or endorsed by CEM Corporation, Mettler Toledo, Ohaus, Sartorius, and other manufacturers listed on our website. All product names, logos, part numbers, and brands are the property and trademark of their respective owners.
We produce, obtain, and provide replacement parts and consumables that meet or exceed the manufacturer’s specifications. Certain parts we obtain directly from the manufacturer, while others we obtain from a 3rd party or manufacture in-house. We manufacture or obtain most consumables from a 3rd party and provide them to our customers at a discounted price. Items that start with LIS-XXXXX are manufactured by us and therefore are NOT OEM parts. Items that end in U, such as xxxxU, are most likely OEM used parts.