lis logo laboratory instrument specialist
cem phoenix

CEM Phoenix Microwave Furnace Oven

$12,500.00

The CEM Phoenix, fully reconditioned by LIS, can be transformed into a complete ashing and weighing center

• Requires no exhaust hood and can be used virtually anywhere

1 in stock

SKU: Phoenix Category: Brand:

Additional information

Brand

CEM
Model

Phoenix
Magnetron Frequency

2, 455 MHz
Exhaust Capabilities

100 CFM
Additional Features

Reduces large volume items in minutes; Durable construction; Complies with AOAC Official Methods; Precise measurement of liquids, solids, slurries, fat (when used with CEM Fat Extractor), High volatiles Dilution, total suspended solids (TSS) and bias syringe weighing; Printer Interface 25-pin parallel; IR Detection System; Internal Calibration of Temperature Control Calibrated to NIST Traceable Standard; Internal Diagnostic Software BITS System (Built-in Test System); Safety Interlocks
Display

20 digit alphanumeric display
Maximum Watts

1400
Minimum Watts

900
Languages

English
Time Range

N/A
Computer Interface

RS-232 Serial
Balance Interface

RS-232, Serial Interface
Controls

Keyboard with 15 keys
Electrical Requirements

10 Amps, 10 amps / 220/240 VAC, 208/230 VAC, 50 Hz, 60 Hz
Unit Dimensions

18.17 x 25.75 x 19.6 in (46.15 x 65.4 x 49.78 cm)
Furnace Chamber Dimensions

8.25 x 4.55 x 3 in (20.96 x 11.56 x 7.62 cm)
Furnace Chamber Volume

N/A
Temperature Capabilities

N/A
Temperature Unit Dimensions

N/A
Weight

97.5 lbs (44.2 kg)
Standards

Complies with HHS standards under 21 CFR, Part 1030.10, Subparts (C}(1 ), (C}(2} and (C}(3)
Condition

Reconditioned

Description

Can be transformed into a complete ashing and weighing center

No exhaust hood and can be used virtually anywhereDisclaimer: Laboratory Instrument Specialists, Inc. is a proudly independent reseller and service provider of pre-owned laboratory equipment. We are not affiliated with, authorized, sponsored, or endorsed by CEM Corporation, Mettler Toledo, Ohaus, Sartorius, and other manufacturers listed on our website. All product names, logos, part numbers, and brands are the property and trademark of their respective owners.
We produce, obtain, and provide replacement parts and consumables that meet or exceed the manufacturer’s specifications. Certain parts we obtain directly from the manufacturer, while others we obtain from a 3rd party or manufacture in-house. We manufacture or obtain most consumables from a 3rd party and provide them to our customers at a discounted price. Items that start with LIS-XXXXX are manufactured by us and therefore are NOT OEM parts. Items that end in U, such as xxxxU, are most likely OEM used parts.

Videos