Additional information
| Weight | 25 lbs |
|---|---|
| Dimensions | 12 × 12 × 34 in |
IKA EUROSTAR 60 Control Laboratory Stirrer
$2,399.99
IKA EUROSTAR 60 Control Laboratory Stirrer Control Features:
- Multilingual TFT display
- Programmable functions
- Integrated temperature measurement
- Interval operation
- Timer function
- Adjustable safety circuit
- Locked function
- Infinitely adjustable speed
- Push-through agitator shafts
- Overload protection
- Short-term overload operation
- Slim casing
- Quiet operation
- Error code display
- H 67.60 temperature sensor and WH 11 WiCo holder included in delivery
3 in stock
Description
The IKA EUROSTAR 60 Control Laboratory Stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 – 2000 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.
IKA EUROSTAR 60 Control Laboratory Stirrer Control Features:
- Multilingual TFT display
- Programmable functions
- Integrated temperature measurement
- Interval operation
- Timer function
- Adjustable safety circuit
- Locked function
- Infinitely adjustable speed
- Push-through agitator shafts
- Overload protection
- Short-term overload operation
- Slim casing
- Quiet operation
- Error code display
- H 67.60 temperature sensor and WH 11 WiCo holder included in delivery
IKA EUROSTAR 60 Control Laboratory Stirrer Technical Data:
| Stirring quantity max. per stirring position (H2O) | 40 l |
| Motor rating input | 168 W |
| Motor rating output | 131 W |
| Motor principle | Brushless DC |
| Speed display | TFT |
| Speed range | 0/30 – 2000 rpm |
| Intermittent operation | yes |
| Viscosity max. | 50000 mPas |
| Output max. at stirring shaft | 126 W |
| Permissible ON time | 100 % |
| Torque max. at stirring shaft | 60 Ncm |
| Speed adjustment | stepless |
| Setting accuracy speed | ±1 rpm |
| Deviation of speed measurement n > 300rpm | ±1 % |
| Deviation of speed measurement n < 300rpm | ±3 rpm |
| Stirring element fastening | chuck |
| Connection for ext. temperature sensor | PT1000 |
| Temperature display | yes |
| Chuck range diameter | 0.5 – 10 mm |
| Hollow shaft, inner diameter | 11 mm |
| Hollow shaft (push-through – when stopped) | yes |
| Fastening on stand | extension arm |
| Extension arm diameter | 16 mm |
| Extension arm length | 220 mm |
| Torque display | yes |
| Speed control | electronic |
| Nominal torque | 0.6 Nm |
| Torque measurement | trend |
| Deviation of torque measurement I | ±6 Ncm |
| Timer | yes |
| Timer display | TFT |
| Time setting range | 1 – 6000 min |
| Temperature measuring range | -10 – +350 °C |
| Temperature measurement resolution | 0.1 K |
| Accuracy of temperature measurement | ±0.5 + tolerance PT1000 (DIN EN 60751 Class A) K |
| Limit deviation temperature sensor | ≤ ± (0.15 + 0.002xITI) K |
| Housing material | alu-cast coating / thermoplastic polymer |
| Communication distance (depend onbuilding) max. | 150 m |
| Dimensions (W x H x D) | 86 x 267 x 230 mm |
| Weight | 4.7 kg |
| Permissible ambient temperature | 5 – 40 °C |
| Permissible relative humidity | 80 % |
| Protection class according to DIN EN 60529 | IP 40 |
| RS 232 interface | yes |
| USB interface | yes |
| Voltage | 115 V |
| Frequency | 50/60 Hz |
| Power input | 176 W |
IKA EUROSTAR 60 Control Laboratory StirrerDisclaimer: Laboratory Instrument Specialists, Inc. is a proudly independent reseller and service provider of pre-owned laboratory equipment. We are not affiliated with, authorized, sponsored, or endorsed by CEM Corporation, Mettler Toledo, Ohaus, Sartorius, and other manufacturers listed on our website. All product names, logos, part numbers, and brands are the property and trademark of their respective owners.
We produce, obtain, and provide replacement parts and consumables that meet or exceed the manufacturer’s specifications. Certain parts we obtain directly from the manufacturer, while others we obtain from a 3rd party or manufacture in-house. We manufacture or obtain most consumables from a 3rd party and provide them to our customers at a discounted price. Items that start with LIS-XXXXX are manufactured by us and therefore are NOT OEM parts. Items that end in U, such as xxxxU, are most likely OEM used parts.