lis logo laboratory instrument specialist
omnimark mark hp moisture balance

Omnimark Mark 2 HP Moisture Analyzer

$4,999.00

The Omnimark Mark 2 HP Moisture Analyzer is fully reconditioned by LIS

  • Measurement method: Infrared radiation and detection of weight loss
  • Heat Source: Four quartz infrared heaters
  • Temperature setting: 30°- 210°C (86°- 410°F) in one degree increments of Celcius
  • Temperature sensor: /- 1°C with Calibration
  • Temperature steps: One or two temperature steps per procedure
  • Weighing pan: 100 mm (4 inches) (HP model 104mm diameter (4 1/8inches))
  • Balance Capacity: 100 grams
  • Balance Readability: 1mg (HP model, 0.2 mg)
  • Readability of Results: 0.01% (P model 0.001%)
  • Recommended Working Range:0.10 99.90% standard version0.01 99.950% High Performance Version
  • End Analysis Modes:
  • ime out: (max 198 minutes) automatic slope and 3 calculation modes
  • Units of results: % mie, % slid or % vlatiles, moisture/dry, ppm and mg/l
  • Display: Backlit liquid crystal display, 30 characters by 8 lines
  • Controls: Test, Zero, Paper Feed, Help, Enter
  • Program Storage: 249 programs with alphanumeric naming
  • Data Storage: 255 last results with statistical evaluations
  • Integral Printer: Thermal, 40 character graphical
  • External I/O: One Serial bi-directional and one serial uni-directional RS232C

Purchase includes shipping, 1 box of dishes and 12-months warranty.

1 in stock

SKU: Mark2HP Category: Brand: , ,

Additional information

Weight 85 lbs
Dimensions 25 × 25 × 15 in
Brand

Omnimark
Model

Mark 2 High Performance
Maximum Capacity

100 g
Readability

0.2 mg
Resolution

0.01%
Moisture/Solids Range

0.01-99.95%
Additional Features

Indoor Use Only; improved process control; microwave chamber is small and cylindrical; energy is focused on the sample; low power consumption means no charring of the sample; simple key stroke to test a sample; automatic weight capture of initial and final weight; one-step recall of up to 249 customizable programs; integrated printer; Class 1 equipment
Watts

450
Languages

English
Software

N/A
Storage

30 dry procedures, 495 results with evaluations
Data Entry Method

Test, Enter, 4 arrows, 4 softkeys and numeric keypad with decimal and +/- keys
Microwave Freqency

N/A
Sound Pressure

<70dBA
Electrical Requirements

100V, 50/60 Hz, 550W, 10 Amps; 120V, 60 Hz, 550W, 10 Amps
Recommended Altitude

<3000 m
Dimensions

22 x 22 x 12 in (55.9 x 55.9 x 30.5 cm)
Weight

85 lbs (38.6 kg)
Operating Temperature Req.

30°- 210°C (86°- 410°F)
Condition

Reconditioned
Product Type

Moisture Balances

Description

The Omnimark Mark 2 High Performance is a rapid moisture determination system that specializes in high moisture analysis processing

  • Samples yield results in less than 1 minute
  • Sensor technology determines when water is fully liberated

• Measurement method: Infrared radiation and detection of weight loss

• Heat Source: Four quartz infrared heaters

• Temperature setting: 30°- 210°C (86°- 410°F) in one degree increments of Celcius

• Temperature sensor: /- 1°C with Calibration

• Temperature steps: One or two temperature steps per procedure

• Weighing pan: 100 mm (4 inches) (HP model 104mm diameter (4 1/8inches))

• Balance Capacity: 100 grams

• Balance Readability: 1mg (HP model, 0.2 mg)

• Readability of Results: 0.01% (P model 0.001%)

• Recommended Working Range:

o .10 99.90% standard version

o .01 99.950% High Performance Version

• End Analysis Modes:

• Time out: (max 198 minutes) automatic slope and 3 calculation modes

• Units of results: % mie, % slid or % vlatiles, moisture/dry, ppm and mg/l

• Display: Backlit liquid crystal display, 30 characters by 8 lines

• Controls: Test, Zero, Paper Feed, Help, Enter

• Program Storage: 249 programs with alphanumeric naming

• Data Storage: 255 last results with statistical evaluations

• Integral Printer: Thermal, 40 character graphical

• External I/O: One Serial bi-directional and one serial uni-directional RS232CDisclaimer: Laboratory Instrument Specialists, Inc. is a proudly independent reseller and service provider of pre-owned laboratory equipment. We are not affiliated with, authorized, sponsored, or endorsed by CEM Corporation, Mettler Toledo, Ohaus, Sartorius, and other manufacturers listed on our website. All product names, logos, part numbers, and brands are the property and trademark of their respective owners.
We produce, obtain, and provide replacement parts and consumables that meet or exceed the manufacturer’s specifications. Certain parts we obtain directly from the manufacturer, while others we obtain from a 3rd party or manufacture in-house. We manufacture or obtain most consumables from a 3rd party and provide them to our customers at a discounted price. Items that start with LIS-XXXXX are manufactured by us and therefore are NOT OEM parts. Items that end in U, such as xxxxU, are most likely OEM used parts.

Videos