Description
The Sartorius Mark 3 LTE LMA110-Set-P is a rapid determination system that specializes in high moisture/solids analysis processing.
- Samples yield results in less than 1 minute
- Sensor technology determines when water is fully liberated
Additional Product Specifications:
- Modular configuration control and heater modules: Optional
- up to 2 heater
- Temperature Adjustment: Optional fixture for internal electronic two point
- Temperature Display: Display of both target and current temp at each stage of drying and standby
- Conserve Mode Clock: Programmable time by day of week to shut down and wake up analyzer
- Ideal Weight: Audio and visual signal when ideal weight is reached
- Target Limit Alert: Minimum and maximum programmable limits and screen alert when test
- Operator names: Twenty alphanumeric operator names
- Graph Mode: Graph of Temperature/Time and Percent/Time
- Internal Clock Date and Time: International
- Military or AM/PM
- Audible Tone: Key stroke
- ideal weight met and end of test
- selectable On or Off
- System Status Indicator Lights: Two tri-color LEDs (balance & heater) on front of heater module
Fast and accurate moisture or solids measurement with the Sartorius Mark 3 LTE allows adjustments to be made in the processing cycle in minutes rather than hours. With its resolution of 0.01% the Mark3 LTE is an economical and reliable alternative to the drying oven and achieves excellent reproducibility in routine measurements because of its built-in Sartorius weighing technology.
The Sartorius Mark 3 LTE Moisture Analyzers work on the idea of loss on drying. Over a predetermined time period, the instrument settles on a predetermined rate of weight change compared to the sample’s real initial weight. To ensure advanced moisture analysis, they have a built-in temperature and weight calibration function.
The Mark 3’s modular design allows for up to four heating units to be added, allowing for even parallel readings of different samples.
There is an extraordinary amount of applications that are linked to standard procedures for many industries such as:
- Pharmaceutical
- Plastics
- Foods
- Sugar
- Chemical
- Cosmetic
- Waste treatment & more…
The most commonly used glass fiber sample pad for the Sartorius Mark 3 HP would be the LIS Glass Fiber Sample Pad Round 9cm. The aluminum disposable dished used with the Mark 3 are our LIS item AD90.
Available to purchase on our website:
9.0 cm Round Glass Fiber Sample Pads (200 Pads Per Box): https://lissci.com/product/round-glass-fiber-sample-pads-9-cm/
Aluminum disposable dish (50 dishes Per Box): https://lissci.com/product/lis-9-cm-aluminum-dishes-50-count
To check out more content on the Sartorius Mark 3 LTE LMA110-Set-P Moisture Analyzer and other instruments, visit our YouTube Channel for more information!
